Hardware

The output from cat /proc/cpuinfo, lspci and dmesg from the head node is representative of all eight nodes (excluding, of course, the 3ware controller, the CUDA card and the extra memory). Here they are:

#
# cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
stepping        : 11
cpu MHz         : 1603.000
cache size      : 4096 KB
physical id     : 0
siblings        : 4
core id         : 0
cpu cores       : 4
apicid          : 0
initial apicid  : 0
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips        : 4803.96
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor       : 1
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
stepping        : 11
cpu MHz         : 1603.000
cache size      : 4096 KB
physical id     : 0
siblings        : 4
core id         : 1
cpu cores       : 4
apicid          : 1
initial apicid  : 1
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips        : 4800.24
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor       : 2
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
stepping        : 11
cpu MHz         : 1603.000
cache size      : 4096 KB
physical id     : 0
siblings        : 4
core id         : 2
cpu cores       : 4
apicid          : 2
initial apicid  : 2
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips        : 4800.25
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

processor       : 3
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz
stepping        : 11
cpu MHz         : 1603.000
cache size      : 4096 KB
physical id     : 0
siblings        : 4
core id         : 3
cpu cores       : 4
apicid          : 3
initial apicid  : 3
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall lm constant_tsc arch_perfmon pebs bts rep_good pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips        : 4800.25
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:
#
#
# lspci 
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1
00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 3
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 4
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 6
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
01:01.0 RAID bus controller: 3ware Inc 9xxx-series SATA-RAID
01:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
03:00.0 IDE interface: JMicron Technologies, Inc. JMB368 IDE controller
08:00.0 VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 260] (rev a1)
#
# dmesg
Initializing cgroup subsys cpuset
Linux version 2.6.26.5-2.nsa1 (gmk@build64.infiscale.com) (gcc version 4.3.0 (GCC) ) #1 SMP Sat Sep 20 14:55:11 PDT 2008
Command line: root=/dev/sda3 vga=0x317
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009a400 (usable)
 BIOS-e820: 000000000009a400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
 BIOS-e820: 00000000bffb0000 - 00000000bffc0000 (ACPI data)
 BIOS-e820: 00000000bffc0000 - 00000000bfff0000 (ACPI NVS)
 BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
Entering add_active_range(0, 0, 154) 0 entries of 256 used
Entering add_active_range(0, 256, 786352) 1 entries of 256 used
Entering add_active_range(0, 1048576, 2359296) 2 entries of 256 used
max_pfn_mapped = 2359296
init_memory_mapping
DMI present.
ACPI: RSDP 000FA020, 0014 (r0 ACPIAM)
ACPI: RSDT BFFB0000, 0038 (r1 071808 RSDT1632 20080718 MSFT       97)
ACPI: FACP BFFB0200, 0084 (r1 A M I  OEMFACP  12000601 MSFT       97)
ACPI: DSDT BFFB0440, 59DA (r1  AS112 AS112132      132 INTL 20051117)
ACPI: FACS BFFC0000, 0040
ACPI: APIC BFFB0390, 006C (r1 071808 APIC1632 20080718 MSFT       97)
ACPI: MCFG BFFB0400, 003C (r1 071808 OEMMCFG  20080718 MSFT       97)
ACPI: OEMB BFFC0040, 0072 (r1 071808 OEMB1632 20080718 MSFT       97)
ACPI: SSDT BFFC0AC0, 0A7C (r1 DpgPmm    CpuPm       12 INTL 20051117)
Entering add_active_range(0, 0, 154) 0 entries of 256 used
Entering add_active_range(0, 256, 786352) 1 entries of 256 used
Entering add_active_range(0, 1048576, 2359296) 2 entries of 256 used
  early res: 0 [0-fff] BIOS data page
  early res: 1 [6000-7fff] TRAMPOLINE
  early res: 2 [200000-dfffff] TEXT DATA BSS
  early res: 3 [7feff000-7ffeffe6] RAMDISK
  early res: 4 [9a400-fffff] BIOS reserved
  early res: 5 [8000-11fff] PGTABLE
 [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0
 [ffffe20002e00000-ffffe20007dfffff] PMD -> [ffff81000c000000-ffff810010ffffff] on node 0
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  2359296
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0:        0 ->      154
    0:      256 ->   786352
    0:  1048576 ->  2359296
On node 0 totalpages: 2096970
  DMA zone: 56 pages used for memmap
  DMA zone: 3188 pages reserved
  DMA zone: 750 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 767976 pages, LIFO batch:31
  Normal zone: 17920 pages used for memmap
  Normal zone: 1292800 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
PM: Registered nosave memory: 000000000009a000 - 000000000009b000
PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000bffb0000 - 00000000bffc0000
PM: Registered nosave memory: 00000000bffc0000 - 00000000bfff0000
PM: Registered nosave memory: 00000000bfff0000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ffb80000
PM: Registered nosave memory: 00000000ffb80000 - 0000000100000000
Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
PERCPU: Allocating 54064 bytes of per cpu data
NR_CPUS: 255, nr_cpu_ids: 4
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2061526
Kernel command line: root=/dev/sda3 vga=0x317
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
TSC calibrated against PM_TIMER
time.c: Detected 2400.082 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x4000000 - 0x8000000
Memory: 8166124k/9437184k available (2285k kernel code, 221092k reserved, 7246k data, 268k init)
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay using timer specific routine.. 4803.96 BogoMIPS (lpj=9607937)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20080321
CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
Using local APIC timer interrupts.
APIC timer calibration result 16667234
Detected 16.667 MHz APIC timer.
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4800.17 BogoMIPS (lpj=9600341)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2/2 ip 6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 4800.18 BogoMIPS (lpj=9600379)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU2: Thermal monitoring enabled (TM2)
CPU2: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3/3 ip 6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4800.18 BogoMIPS (lpj=9600379)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU3: Thermal monitoring enabled (TM2)
CPU3: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz stepping 0b
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (19204.51 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1
  groups: 0 1
  domain 1: span 0-3
   groups: 0-1 2-3
CPU1 attaching sched-domain:
 domain 0: span 0-1
  groups: 1 0
  domain 1: span 0-3
   groups: 0-1 2-3
CPU2 attaching sched-domain:
 domain 0: span 2-3
  groups: 2 3
  domain 1: span 0-3
   groups: 2-3 0-1
CPU3 attaching sched-domain:
 domain 0: span 2-3
  groups: 3 2
  domain 1: span 0-3
   groups: 2-3 0-1
net_namespace: 1192 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - E5, should be DC [20080321]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI-GART: No AMD northbridge found.
ACPI: RTC can wake from S4
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x500-0x57f has been reserved
system 00:07: ioport range 0x900-0x90f has been reserved
system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved
system 00:09: iomem range 0xffc00000-0xfff7ffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0e: ioport range 0x280-0x28f has been reserved
system 00:0e: ioport range 0x290-0x29f has been reserved
system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
system 00:10: iomem range 0x0-0x9ffff could not be reserved
system 00:10: iomem range 0xc0000-0xcffff has been reserved
system 00:10: iomem range 0xe0000-0xfffff could not be reserved
system 00:10: iomem range 0x100000-0xbfffffff could not be reserved
system 00:10: iomem range 0xfed90000-0xffffffff could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: e000-efff
  MEM window: 0xfa000000-0xfebfffff
  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
PCI: Bridge: 0000:00:1c.0
  IO window: d000-dfff
  MEM window: 0xf9800000-0xf9ffffff
  PREFETCH window: 0x00000000ce000000-0x00000000cfffffff
PCI: Bridge: 0000:00:1c.1
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: 0x00000000cdf00000-0x00000000cdffffff
PCI: Bridge: 0000:00:1c.2
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: 0x00000000cde00000-0x00000000cdefffff
PCI: Bridge: 0000:00:1c.3
  IO window: c000-cfff
  MEM window: 0xf9700000-0xf97fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
  IO window: b000-bfff
  MEM window: 0xf9600000-0xf96fffff
  PREFETCH window: 0x00000000cdd00000-0x00000000cddfffff
PCI: Bridge: 0000:00:1e.0
  IO window: a000-afff
  MEM window: 0xf9500000-0xf95fffff
  PREFETCH window: 0x00000000cd000000-0x00000000cd7fffff
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 963k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1231503535.611:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15952
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci 0000:08:00.0: Boot video device
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
Allocate Port Service[0000:00:1c.5:pcie03]
vesafb: framebuffer at 0xfb000000, mapped to 0xffffc20010100000, using 3072k, total 14336k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
usbmon: debugfs is not available
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
Freeing unused kernel memory: 268k freed
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
No dock devices found.
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x8c00 ctl 0x8880 bmdma 0x8400 irq 19
ata2: SATA max UDMA/133 cmd 0x8800 ctl 0x8480 bmdma 0x8408 irq 19
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: NODEV after polling detection
ata1.00: ATAPI: Optiarc DVD RW AD-7200S, 1.06, max UDMA/100
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: CD-ROM            Optiarc  DVD RW AD-7200S  1.06 PQ: 0 ANSI: 5
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 19
ata4: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 19
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 22
scsi4 : 3ware 9000 Storage Controller
3w-9xxx: scsi4: Found a 3ware 9000 Storage Controller at 0xf95ff800, IRQ: 22.
3w-9xxx: scsi4: Firmware FE9X 2.08.00.006, BIOS BE9X 2.03.01.052, Ports: 4.
scsi 4:0:0:0: Direct-Access     AMCC     9500S-4LP  DISK  2.08 PQ: 0 ANSI: 3
sd 4:0:0:0: [sda] 2929625088 512-byte hardware sectors (1499968 MB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
sd 4:0:0:0: [sda] 2929625088 512-byte hardware sectors (1499968 MB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 23 00 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 4:0:0:0: [sda] Attached SCSI disk
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem sda3
Starting XFS recovery on filesystem: sda3 (logdev: internal)
Ending XFS recovery on filesystem: sda3 (logdev: internal)
r8168 Gigabit Ethernet driver 8.009.00-NAPI loaded
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
eth0: Identified chip type is 'RTL8168C/8111C'.
eth0: RTL8168B/8111B at 0xffffc20000074000, 00:19:66:83:bc:0b, IRQ 8409
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 21 (level, low) -> IRQ 21
r8169 0000:01:00.0: no PCI Express capability
eth1: RTL8169sb/8110sb at 0xffffc20000076400, 00:30:4f:61:4d:69, XID 10000000 IRQ 21
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 23 (level, low) -> IRQ 23
r8169 0000:01:02.0: no PCI Express capability
eth2: RTL8169sb/8110sb at 0xffffc20000078c00, 00:30:4f:61:50:fe, XID 10000000 IRQ 23
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
input: PC Speaker as /class/input/input2
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00007400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00007480
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00007800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00007880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00007c00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 4-1: new low speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf94ff400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
usb 4-1: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf94ff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
hiddev96: USB HID v1.10 Device [CPS UPS VALUE] on usb-0000:00:1d.0-1
usb 4-1: USB disconnect, address 2
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Unable to find any System Interface(s)
ipmi device interface
ACPI: SSDT BFFC00C0, 0277 (r1 DpgPmm  P001Ist       11 INTL 20051117)
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: SSDT BFFC0340, 0277 (r1 DpgPmm  P002Ist       12 INTL 20051117)
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: SSDT BFFC05C0, 0277 (r1 DpgPmm  P003Ist       12 INTL 20051117)
ACPI: ACPI0007:02 is registered as cooling_device2
ACPI: SSDT BFFC0840, 0277 (r1 DpgPmm  P004Ist       12 INTL 20051117)
ACPI: ACPI0007:03 is registered as cooling_device3
usb 4-1: new low speed USB device using uhci_hcd and address 3
IPMI System Interface driver.
usb 4-1: configuration #1 chosen from 1 choice
ipmi_si: Unable to find any System Interface(s)
hiddev96: USB HID v1.10 Device [CPS UPS VALUE] on usb-0000:00:1d.0-1
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
3ware Storage Controller device driver for Linux v1.26.02.002.
scsi 0:0:0:0: Attached scsi generic sg0 type 5
sd 4:0:0:0: Attached scsi generic sg1 type 0
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
JMB: IDE controller (0x197b:0x2368 rev 0x00) at  PCI slot 0000:03:00.0
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19
JMB: 100% native mode on irq 19
    ide0: BM-DMA at 0xc400-0xc407
    ide1: BM-DMA at 0xc408-0xc40f
Probing IDE interface ide0...
nvidia: module license 'NVIDIA' taints kernel.
Driver 'sr' needs updating - please use bus_type methods
Probing IDE interface ide1...
EXT2-fs warning (device sda1): ext2_fill_super: mounting ext3 filesystem as ext2
ide0 at 0xcc00-0xcc07,0xc882 on irq 19
ide1 at 0xc800-0xc807,0xc482 on irq 19
ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:08:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  177.73  Mon Sep 15 18:48:39 PDT 2008
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
Adding 2097136k swap on /dev/sda2.  Priority:-1 extents:1 across:2097136k
r8168: eth0: link up
r8169: eth1: link up
r8169: eth2: link up
Bridge firewalling registered
vmbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
usb 4-1: USB disconnect, address 3
ip6_tables: (C) 2000-2006 Netfilter Core Team
usb 4-1: new low speed USB device using uhci_hcd and address 4
usb 4-1: configuration #1 chosen from 1 choice
hiddev96: USB HID v1.10 Device [CPS UPS VALUE] on usb-0000:00:1d.0-1
ip_tables: (C) 2000-2006 Netfilter Core Team
usb 4-1: USB disconnect, address 4
eth1: no IPv6 routers present
eth0: no IPv6 routers present
vmbr0: no IPv6 routers present
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
usb 4-1: new low speed USB device using uhci_hcd and address 5
usb 4-1: configuration #1 chosen from 1 choice
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 50-second grace period
hiddev96: USB HID v1.10 Device [CPS UPS VALUE] on usb-0000:00:1d.0-1
warning: `ntpd' uses 32-bit capabilities (legacy support in use)
usb 4-1: USB disconnect, address 5
usb 4-1: new low speed USB device using uhci_hcd and address 6
usb 4-1: configuration #1 chosen from 1 choice
hiddev96: USB HID v1.10 Device [CPS UPS VALUE] on usb-0000:00:1d.0-1
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
coretemp coretemp.2: Using relative temperature scale!
coretemp coretemp.3: Using relative temperature scale!
about/hardware.txt · Last modified: 2009/06/06 12:44 (external edit)